Vlano 100VAIR Operating Manual Download Page 10

DE

MANUFACTURER'S WARRANTY

The product complies with European norms and standards, the directives on low voltage and electromagnetic 

compatibility. We hereby declare that the product complies with the relevant requirements of directive 

2014/30 / EU on electromagnetic compatibility, low-voltage directive 2014/35 / EU and directive 93/68 / EEC on 

CE marking.

This certificate is issued for the above after testing the product.

The manufacturer sets a guarantee period of 24 months from the date of sale through retailers, provided that 

the consumer fulfills the regulations for transport, storage, assembly and operation.

In the event of malfunctions in the device due to errors caused by the factory that occur within the warranty period, 
the consumer is entitled to free repair of the device defects by means of warranty repair by the manufacturer.

The warranty repair includes, in particular, work to remedy defects in the operation of the device in order to 

ensure that the device is used as intended within the warranty period.

Defects are remedied by replacing or repairing the defective parts or units of the device.

The warranty service does not include:

• regular technical maintenance

• Assembly / disassembly of the device

• Set up the device

For warranty repairs, the consumer must present the device, the operating instructions with the date of purchase and 
proof of payment as confirmation of the purchase.

The model of the device presented must match the model specified in the operating instructions. Contact the 

seller of the device for warranty service.

The guarantee does not apply in the following cases:

• The consumer does not submit the fan completely, as stated in the operating instructions, including the components 

of the device dismantled by the consumer.

• Incompatibility of the model or brand of the device with the information on the packaging and in the operating 
instructions.

• Failure to timely technical maintenance of the device by the consumer.

• In the event of external damage to the housing and internal units (except external

10

Summary of Contents for 100VAIR





















Reviews: