Vlano 100VAIR, Operating Manual

Page: 7 / 20

DE
DESIGNATION KEY
100 VAIR duo X
(220-240V / 60 Hz) Ч
Power supply
_: 220-240 V / 50 Hz
220-240 V / 60 Hz: power supply 220-240 V, frequency 60 Hz
Motor type: Additional options:
_: Basic version (switching on and off)
T: switch-on delay, run-on switch and interval timer TH:
switch-on delay, run-on switch and humidity sensor
Engine type:
Duo: two-stage motor
Discharge nozzle diameter, mm
ASSEMBLY
The fan is designed for wall or ceiling mounting and connection to a ventilation duct or a ventilation pipe of
compatible diameter (Fig. 2).
Step 1. Disconnect the device from the power supply and ensure that the power is switched off (Fig. 3).
Step 2. Route the power cable to the ventilation opening (Fig. 4).
Step 3. Remove the design cover from the fan. Then remove the fan cover (Fig. 5).
Step 4. Mark and drill the mounting holes and mount the fan (Fig. 6-8).
Step 5. Connect the fan to the power supply in accordance with the connection diagram (Fig. 12-13).
Step 6. Put the cover back on the terminal strip (Fig. 9) and the design cover (Fig. 10) back on the fan housing.
Step 7. Reconnect the power supply to the fan (Fig. 11).
Designations of the terminals on the connection diagrams:
L:
phase
N: zero
S: external switch
QF: Circuit breaker
7th