VK MOBILE VK2000, Manual

Page: 12 / 65

23 22
1. When there is an incoming call, either bell tone or
vibration is activated depending on the configuration.
2. Press button.
3. To hang up, Press button.
If a caller ID service is activated and if the incoming phone
number is already stored in your contacts, the name you
have stored for the phone number is displayed.
Answering a Call
Press button to hang up.
Hanging up
You can use a variety of functions while talking on the
phone.
[Call Standby]
This function is available only when a network service is
provided. When this function is used, Using this function, you
can make a call or answer other calls during any time of call.
Options During a Call
Confirm that you have flashed back to the previous call and
press
button to go back to the previous call.
[Ending a Call]
End a call during a Call : This function ends the current call.
End a call on hold : This function ends a call on hold.
End all calls : This function ends both the current call and the
call on hold.
[Flash]
When there is a new incoming call, you can either answer the
call or put it on hold. Also, you can switch the current call
with the new incoming call.
[DTMF Function]
You can enter numbers and send it during a call.
In case where you need to enter a long sequence of numbers
such as paging, ARS, or Telebanking, you can store the
frequently used numbers (social security number or bank
account number) to send them with greater convenience.
BASIC FUNCTIONS