1
2
STEP 3B - MOUNTING TO A CONCRETE WALL
1. Hold the mount against the wall
Use the built-in level to level the mount.
When the mount is level, hold it in place and use the pencil to
mark the areas inside the slots where bolt holes will be drilled.
2. Place the mount on the floor.
Using the power drill and the 1/2” drill bit, drill into the pencil
marks as shown. Drill about 2 1/2” deep.
Instead of holding the mount against the wall, you can use
the included template. Please note: To level the template,
you will need a level (not included).
Built-In Level
2
1
3
4
Pencil Marks
1/2”
6
