I N S T A L L A T I O N I N S T R U C T I O N S
CHIEF MANUFACTURING INC.
8805-000043
1-800-582-6480
952-894-6280 FAX 952-894-6918
2003 Chief Manufacturing
8
401 EAGLE CREEK PKWY
, STE
7
00
www.chiefmfg.com
PLASMA DISPLAY STATIC MOUNT
PSM-2091, PSM-2092, & PSM-2095
Figure 1
(1) Plasma Static Mount
(1) 10-24 x .5 FH Socket Screw
(1) Latching Flag
(1) 10-24 Nylock Nut
(1) Nylon Washer
BEFORE PROCEEDING:
Unpack the carton, verify contents shown in Figure 1 and read
installation instructions completely. If you are missing any of the listed components, please
contact Customer Service at 1-800/582-6480.
CAUTION!
PLASMA DISPLAYS ARE EXTREMELY FRAGILE.
The PSM 2091, 2092, and 2095 is designed so one mount will work for the Sony
PFM32, Sony PFM42, and Sony PFM50 plasma displays. There are 3 mounting
patterns on the mount corresponding to the mounting button pattern on the back
of the respective plasma. On one side of the mount has patterns for the 32 and 42-
inch plasma and the other side has the mounting pattern for the 50-inch plasma.
The latching flag must be attached to the mount in the proper location for each
individual plasma.
1. Attach latching flag to mount utilizing the proper position on the mount with the latching flag
on the inside of the mount. Tighten Nylock nut until friction is sufficient to hold the latch in
place (see Figure 2, Figure 3, Figure 4, & Figure 5).
Figure 5
Figure 4
Figure 3
Figure 2
SAVAGE, MINNESOTA 55378 USA
0
8
/0
4
