www.vizi-tec.com
November 26, 2017
Page 7 of 24
Contact
ATTRIBUTE DEFINITIONS:
Attribute#1 – GRACE PERIOD definitions:
(switch location)
SWT 1
SWT 2
SWT 3
SWT 4
SWT 5
SWT 6
SWT 7
SWT 8
SWT 9
SWT 10
SWT 11
SWT 12
Toggle Switch Position
Value
1=
Off
2=
Off
0 seconds
1=
Off
2=
On
3 seconds
1=
On
2=
OFF
6 seconds
1=
On
2=
On
12 seconds
This is the first of five SBT profile attributes. It determines the offset of the algorithm. Meaning the delay at which the first pulse will
appear after the previous brake cycle. Setting this to “0 seconds” removes the offset and allows the modulation◊ to be generated
right away on each press of the brake.
Setting this attribute to “6 seconds” will not allow the modulation to happen until a period of 6 seconds or greater has elapsed. We
recommend keeping this value above “6 seconds” setting to not annoy the vehicle behind. From factory this is set to “12 seconds”.
This is a great feature during heavy stop and go traffic. Use it!
Note: Profile updates do not take effect until after the next brake cycle.