www.vizi-tec.com
November 26, 2017
Page 17 of 24
Contact
FAQ
:
The SBT-4K can be somewhat of a complex device. It has many functions and features. But very easy to use once
understood. It is strongly recommended that you read this manual before installation and/or ordering. Understanding its
simplicity is the beauty of it. Installation is simple. Designed to be fully Plug and Play. You do not need to visit your local
dealership to make the installation. VIZI-TEC LLC cannot and will not be responsible for charges incurred if installed at
dealership.
Why isn’t the SBT-4K modulating?
Firstly you must remember that the SBT-4K has an algorithm (with Grace_Period). The number of blinks (modulation) and
frequency will be determined by the profile attributes selected. If the Grace Period has been set to anything thing other then
0 seconds as in the case of factory default, the unit will NOT FLASH EACH AND EVERY TIME you push the brakes. See page 6
for more details on the attribute of the Grace Period.
Troubleshoot:
1)
Turn on the car power. No need to start the engine. (Let’s assume the Grace_Period is set to 6 seconds.)
a)
Do not touch any brakes...
2)
Wait about 10 seconds.
3)
Press and hold the brakes. The 3
rd
brake like will modulate. The longer you don’t use your brakes the more it will flash
the next time you use it.
Why is it only flashing about 3 times?
The time period between usage of the brakes will determine the length of the modulation burst. The longer the brakes are
not used. The more modulation the output will be the next time around. See pg.16 for attribute settings.
I don’t see a kit for my car/truck? How do I get one made?
Send us an email at [email protected] and let us know the year/model of your bike. If the bike model is 5 years or newer
we’ll work with you to make a custom kit for half the price.
Cold Start?
The SBT-4K will power up with the algorithm loaded to max (T6).
