www.vizi-tec.com
November 26, 2017
Page 14 of 24
Contact
INSTALLATION
:
Plug & Drive version - Very simple.
1.
Before removing or opening the rear window third brake light assembly please verify your brake light is functioning.
2.
Locate the stock connector that interfaces the main wire harness to the 3
rd
brake light. Open this connector and plug the
SB-T in series. No need to take to dealer!
Installation examples can be found at
http://www.vizi-tec.com/sb-docs/
for download. You may not find one specific to your vehicle.
Reason being we stopped making model specific installation as these are very simple; Read one and you’ve read them all. If you have
questions or comments please send us an email at [email protected].
Universal version – A more complex.
1.
Before removing or opening your third brake light assembly please verify your brake light(s) are functioning.
2.
See below for wire color and gauge. Use included Posi-Locks connector to quick secure interface.
Wire gauge = 20 AWG.
Red = Input brake )
Black = Ground(-)
White = Modulated output