VIVOTEK
User's Manual - 69
Preset positions
If you select DynaDome/SmartDOME, Lilin PIH-7x00, or Pelco D, Pelco P protocol, Samsung scc643
protocol
protocol as the PTZ driver and click the
Save
button, the
Preset Position
button will be enabled.
Click
Preset Position
to open the settings page. You can also select preset positions for the camera to
patrol. A total of 20 preset positions can be configured.
Please follow the steps below to preset a position:
1. Select
Channel
in the drop-down list.
2. Adjust the shooting area to the desired position by using the buttons on the right.
The default
Home
position is set as the center position.
3. Enter a name for the preset position, which allows up to forty characters. Click
Add
to enable the
settings. The preset positions will be displayed under
User preset locations
.
4. To add additional preset positions, please repeat steps 1~2.
5. Select the preset positions and click on
Save
to enable the settings.
6. The positions saved will show up in
Go to
drop down list on the Home page. See next page
7. To remove a preset position from the list, select it and click
Remove
.
Functions are the same
as the Control Panel on
the home page
1
3
6
5
2
7
