VIVOTEK
136 - User's Manual
7.10 IR cut control
Group:
ircutcontrol
(capability.nvideoinprofile > 0)
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
mode auto,
day,
night,
di,
schedule
<product
dependent>
6/6
Set IR cut control mode
daymodebegintime
00:00~23:59
6/6
Day mode begin time
daymodeendtime
00:00~23:59
6/6
Day mod end time
disableirled
<boolean>
6/6
Enable/disable built-in IR LED.
bwmode
<boolean>
6/6
Switch to B/W in night mode if enabled
sensitivity low,
normal,
high
6/6
Sensitivity of light sensor
7.11 Image setting per channel
Group:
image_c<0~(n-1)>
for n channel products
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
brightness
-5~5
4/4
Adjust brightness of image according to mode settings.
saturation
-5~5,100
4/4
Adjust saturation of image according to mode settings.
100 for saturation percentage mode.
saturationpercent
0~100
4/4
Adjust saturation value of percentage when
saturation=100
contrast
-5 ~ 5
4/4
Adjust contrast of image according to mode settings.
sharpness
-3~3,100
4/4
Adjust sharpness of image according to mode settings.
100 for sharpness percentage mode.
sharpnesspercent
0~100
4/4
Adjust sharpness value of percentage when
sharpness=100
gammacurve
0~100
4/4
Gamma curve.
lowlightmode
<boolean> 4/4
Enable/disable low light mode.
profile_i0_enable
<boolean> 4/4
Enable/disable this profile setting
profile_i0_policy
day,
4/4
The mode which the profile is applied to.
Summary of Contents for IP8362
Page 1: ...Rev 1 1 ...
