VIVOTEK
User's Manual - 95
Media Settings
The
Media Settings
panel on the
Application
page is displayed when there are existing media settings�
They are identical to those configured in the
Add Media
panel of the
Event Settings
(See page 91)�
Due to the limited size of the onboard memory, the media contents recorded during the occurrences of
events should be delivered to the recipient side via Email, FTP, HTTP, or Network Storage� The onboard
memory is primarily used as a transaction storage for capturing pre-event contents, and hopefullly critical
data will be preserved if the camera is maliciously disconnected�
Please note that a small amount of memory is preserved for audio recordings that will be used as a vocal
message to someone on the scene or intruders� Audio clip playback is one of the event-triggered actions�
Click
Add
to enter the recording page� You can grab the camera close to you and record a vocal
message using the onboard microphone. To record a vocal message:
1� Enter a name for the recording�
2. Configure an elapse of time before the recording takes place after you click the
Record
button�
3� Click on the
Record
button� A recording progress window will prompt� Click
Stop
to end the recording�
4� Click
Replay
to ensure you have a satisfactory recording�
5� Click
Save
and click the
Close
button to end the process�
You can click the
Download
button to download the recorded wave file to your PC or click
Delete
to
remove it from camera memory�
If you have audio wave files ready on your PC, you can upload the wave files to a camera using the
corresponding
Upload
checkcircle in the Media Type window�
NOTE:
The recorded audio will be saved as mono waves,
in 8 KHz and 16-bit format�
If you prefer upload audio files to your camera, the
following should be noticed:
1� Stereo will be converted to mono�
2� Higher KHz (e�g�, 22�050 KHz) audio will be
downgraded to 8 KHz�
3� Only
16-bit
files are supported.
8-bit
wave files
are not supported�
Browse...
