Vivotek IP7160 User Manual Download

Page: 92 / 149

VIVOTEK

92 - User's Manual

Download: Click on a search result to highlight the selected item in purple as shown above� Then click

the

Download

button and a file download window will pop up for you to save the file.

JPEGs to AVI: This functions only applies to “JPEG“ format files such as snapshots� You can select

several snapshots from the list, then click this button. Those snapshots will be converted into an AVI file.

Lock/Unlock: Select the desired search results, then click this button. The selected items will become

Locked, which will not be deleted during cyclic recoroding. You can click again to unlock the selections.

For example:

Remove

: Select the desired search results, then click this button to delete the files.

Summary of Contents for IP7160






















































































































































Search results

Summary of Contents for IP7160

Reviews:

Related manuals for IP7160

Brands by name

Popular brands

Vivotek IP7160, User Manual

Search results

Summary of Contents for IP7160

Reviews:

Related manuals for IP7160

Brands by name

Popular brands