VIVOTEK
User's Manual - 51
■ Refresh: Click this button to refresh all current connections.
■ Add to deny list: You can select entries from the Connection Status list and add them to the Deny List
to deny access� Please note that those checked connections will only be disconnected temporarily
and will automatically try to re-link again (IE Explore or Quick Time Player)� If you want to enable the
denied list, please check
Enable access list filtering
and click
Save
in the first column.
■ Disconnect: If you want to break off the current connections, please select them and click this
button� Please note that those checked connections will only be disconnected temporarily and will
automatically try to re-link again (IE Explore or Quick Time Player)�
Enable access list filtering
: Check this item and click
Save
if you want to enable the access list filtering
function�
Filter
There are two lists for permission control: Allowed list and Denied list� Only those clients whose IP
addresses are on the Allowed list and not on the Denied list can access the Network Camera� Please
note that the IPv6 access list column will not be displayed unless you enable IPv6 on the Network page�
For more information about
IPv6 Settings
,
please refer to page 37 for detailed information�
■ Add a rule to Allowed/Denied list: Click
Add
to add a rule to Allowed/Denied list.
There are three types of rules:
Single
: This rule allows the user to add an IP address to the Allowed/Denied list.
For example:
Summary of Contents for IP7160
Page 1: ......
