VIVOTEK
34 - User's Manual
Enable UPnP port forwarding
: To access the Network Camera from the Internet, select this option to
allow the Network Camera to open ports on the router automatically so that video streams can be sent
from the LAN. To utilize this feature, make sure that your router supports UPnP
TM
and it is activated�
PPPoE (Point-to-point over Ethernet)
Select this option to configure your Network Camera to make it accessible from anywhere with an
Internet connection. Note that to utilize this feature, it requires an account provided by your ISP.
Follow the steps below to acquire your Network Camera’s public IP address�
1� Set up the Network Camera on the LAN�
2. Go to Home > Configuration > Application > Server Settings (
please refer to Server Settings on page
79) to add a new email or FTP server�
3. Go to Configuration > Application > Media Settings (
please refer to Media Settings on page 82)� Select
System log so that you will receive the system logs in TXT file format which contains the Network
Camera’s public IP address on your email or FTP server�
4. Go to Configuration > Network > Network Type. Select PPPoE and enter the user name and password
provided by your ISP� Click
Save
to enable the setting�
5� The Network Camera will reboot�
6� Disconnect the power to the Network Camera; move it from the LAN environment�
NOTE
► If the default ports are already used by other devices connected to the same router, the Network
Camera will select other ports for the Network Camera�
► If UPnP
TM
is not supported by your router, you will see the following message:
Error: Router does not support UPnP port forwarding.
Mega-pixel Network Camera (192.168.5.151)
Summary of Contents for IP7160
Page 1: ......
