VIVOTEK
User's Manual - 7
Hardware Reset
The reset button is used to reset the system or restore the factory default settings Sometimes
resetting the system can return the camera to normal operation If the system problems remain
after reset, restore the factory settings and install again
Reset
: Press and release the recessed reset button with a straightened paper clip. Wait for the
Network Camera to reboot
Restore
: Press and hold the recessed reset button until the status LED rapidly blinks. Note that
all settings will be restored to factory default Upon successful restore, the status LED will blink
green and red during normal operation
Micro SD/SDHC/SDXC Card Capacity
This network camera is compliant with
Micro SD/SDHC/SDXC 8/16/32/64GB
and other
preceding standard SD cards
Reset Button
LED Definitions
Item LED Status
Description
1
Steady
Red
Power on and system booting
Red
LED off
Powered off
2
Steady
Red
+ blinking
Green
every 1 sec (
Green
LED on for 1 sec and off for another)
Network heartbeat
Steady
Red
+
Green
LED off
Network disconnected
3
Blinking
Red
every 015 sec + Blinking
Green
every 1 sec (
Red
LED on for 015 sec and
Green
LED on for 1 sec and off for another)
Upgrading firmware
4
Blinking
Red
every 015 sec + blinking
Green
every 015 sec
Restoring defaults
