VIVOTEK
User's Manual - 59
You can click
Restore
to recall the original settings without incorporating the changes When
completed with the settings on this page, click
Save
to enable the settings
If you want to configure another sensor setting for day/night/schedule mode, please click
Profile
to
open the Profile of exposure settings page as shown below.
Activated period
: Select the mode this profile to apply to: Day mode, Night mode, or Schedule
mode Please manually enter a range of time if you choose Schedule mode Then check
Save
to
take effect
Please follow the steps below to setup a profile:
1 Check
Enable this profile
2. Select the applied mode: Day mode, Night mode,
or Schedule mode Please manually enter a range
of time if you choose Schedule mode
3. Configure Exposure control settings in the folowing
columns Please refer to previous dicussions for
detailed information
4 Click
Save
to enable the setting and click
Close
to
exit the page
