Vivotek FD8161 User Manual Download

Page: 23 / 156

VIVOTEK

User's Manual - 23

MP4 Saving Options

Users can record live video as they are watching it by clicking

Start MP4 Recording on the main

page. Here, you can specify the storage destination and file name.

Folder

: Specify a storage destination for the recorded video files.

File name prefix: Enter the text that will be appended to the front of the video file name.

Add date and time suffix to the file name

: Select this option to append the date and time to the end of the

file name.

Local Streaming Buffer Time

Due to the unsteady bandwidth flow, the live streaming may lag and not be very smoothly. If you enable

this option, the live streaming will be stored on the camera’s buffer area for a few seconds before playing

on the live viewing window� This will help you see the streaming more smoothly�

If you enter 3000 Millisecond, the streaming will delay 3 seconds�

CLIP_

20090108-180853

Date and time sufﬁx

The format is: YYYYMMDD_HHMMSS

File name preﬁx

Summary of Contents for FD8161





























































































































































Search results

Summary of Contents for FD8161

Reviews:

Related manuals for FD8161

Brands by name

Popular brands

Vivotek FD8161, User Manual

Search results

Summary of Contents for FD8161

Reviews:

Related manuals for FD8161

Brands by name

Popular brands