VIVOTEK
User's Manual - 199
© 2020 VIVOTEK INC. All Right Reserved
50
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
pass
password[64]
7/6
PPPoE account password.
7.6.13
Bonjour
Subgroup of
network
:
service_bonjour
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
enable
<boolean>
6/6
Enable bonjour service feature.
* We support this parameter when the
version number (httpversion) is equal
or greater than 0312a.
servicename
<string>
6/6
A friendly name for bonjour service.
* We support this parameter when the
version number (httpversion) is equal
or greater than 0312a.
7.7
IP Filter
Group:
ipfilter
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
enable
<boolean>
6/6
Enable access list filtering.
admin_enable
<boolean>
6/6
Enable administrator IP address.
admin_ip
string[43]
6/6
Administrator IP address.
maxconnection
1~
"capability_protoc
ol_maxconnection"
6/6
Maximum number of (s).
type
0, 1
6/6
Ipfilter policy :
0 => allow
1 => deny
ipv4list_i<0~9>
Single address: <ip
address>
Network address:
<ip address /
network mask>
Range
address:<start ip
6/6
IPv4 address list.
© 2020 VIVOTEK INC. All Right Reserved
51
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
address - end ip
address>
ipv6list_i<0~9>
string[43]
6/6
IPv6 address list.
7.8
Video Input
<Not Recommended to use>
Group:
videoin
* We do not support this parameter when "capability_nvideoin > 1".
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
cmosfreq
50, 60
4/4
CMOS frequency.
* Only available when
capability_videoin_type is 2.
* We do not support this parameter
when "capability_nvideoin > 1".
* This parameter will not be used
after the version number (httpversion)
is equal or greater than 0400a.
whitebalance
<product dependent>
auto,
panorama,
manual,
rbgain,
widerange,
outdoor,
indoor,
sodiumauto,
etc
(Available values
are listed in
"capability_image_
c<0~(n-1)>_wbmo
de")
4/4
Modes of white balance.
"auto"
: Auto white balance
"panorama"
: indicates that camera
would try to balance the white
balance effect of every sensor.
"rbgain"
: Use rgain and bgain to set
white balance manually.
"manual"
: 2 cases:
a. if "rbgain" is not supported, this
means keep current white balance
status.
b. if "rbgain" is supported, "rgain"
and "bgain" are updated to the
current values which is got from
white balance module. Then, act as
rbgain mode
"widerange"
: Auto Tracing White
