3
ASSEMBLY STEPS
STEP 1
Screw x2 foot pads
(O)
into the underside of the front support frame
(A)
. Place a support
bar spacer
(D)
onto the front (angled) end of each side support bar
(B)
, then assemble
to the front support frame using M8x60 bolts. Tighten using the 5mm Allen wrench
(C1)
.
Insert the side support bars into the rear support bar
(C)
, and secure using x8 M8x16 bolts
(S)
with the 5mm Allen wrench
(C1)
. Screw x2 foot pads
(O)
into the rear support bar.
STEP 2
Remove pre-installed bolts
(A-1)
from the front support frame
(A)
. Assemble right and left
braces
(E, F)
to the frame using previously removed bolts and x4 M8x16 bolts
(S)
. Tighten
with the 5mm Allen wrench
(C1)
.
