Vivo Select 8000 Cordless User Guide
Page 7 of 10
When you are on SPKR phone, press the Line1 & Line2 keys on the base or SPKR keys to disconnect both
parties.
Hold
To active the Hold on line
When you are on the line, press the HOLD key, the line LED will slowly blink red, indicating the call is on hold.
If a conference call is active, pressing the HOLD key will place the two lines on hold. The LED will slowly blink in
red (Available for two lines only)
To restore a call from hold
Press the line key on hold or HOLD key again to restore the call from hold. The LED will return to steady
illumination in red.
If two lines are on hold press CONF key to remove the hold state on both lines and enter conference mode
(Available for two line only)
If one line is on hold and another line is being used to talk (available for two line model), press the HOLD key
first and then press the corresponding line key to switch your conversation from one line to another.
Vol+,Vol-
Press vol+ and vol- on the handset or base to enhance and reduce the voice volume when talking.
Redial
Press the REDIAL key on the handset or base to dial the last number out.
Flash
The flash time can be selected from 100~1000MS. The default time is 600MS.
When you are on the call, press FLASH key and input the number you need to transfer, the call will be
transferred corresponding.
MUTE
To mute a call, press the MUTE button, a blinking light will indicate that you are in mute mode .During this time
the other caller cannot hear you. Press the mute key again to resume the conversation.
Page
If you can’t find the handset, press the PAGE key (the PAGE key is hidden under the faceplate) on the base. An
audible sound will indicate the handset location. Re-press PAGE key or any keys on the handset to stop the
sound.
