Vivo Select 8000 Cordless User Guide
Page 4 of 10
source has been disconnected.
16.
Do not overload wall outlets and extension cords as this can lead to electrical shock.
Medical equipment can be affected by the handset.
Installation before Use
1.
Insert the battery plug into the socket first (the connector goes in one way) and keep the
battery flat and load into battery house, replace the battery cover.
2.
Put the four core line into the four socket.
3.
Plug the AC adapter into the electrical outlet.
4.
Place the cordless handset on the base unit
Charge
1.
We recommended that you charge the battery fully for approximately 10 to 12 hours
constantly before first use for a better performance. Charge the battery by Plugging the
handset into the base, a green light (LED) will blink. When fully charged the indicator light
will remain on constant.
2.
Each time you replace the handset into the base cradle, you will hear a prompt sound
“beep” to indicate that a connection has been made. If you do not hear this sound, please
check the battery connector and power supply cable are properly inserted.
3.
Ensure that the AC adapter is plugged in
4.
Ensure that the upper part of the charging contact mobile is properly in contact with the
unit.
5.
It is important to clean all charging points on the handset and base unit. Use a pencil eraser
or other contact cleaner. Do not use any liquids or solvents.
