Vivo Select 8000 Cordless User Guide
Page 5 of 10
Register a handset to the Base Unit
1.
When the handset is placed on the base, if the message indicator light on the handset and
the charge light blinks red, this indicates that the battery is low and need to charge before
registering.
2.
Automatic registration: place the handset onto the base for 20 seconds, after you hear a
beep sound, the handset has registered successfully with the base.
3.
Manual–registering: press the PAGE key (the hide key on the base) on the Base until the
LED blinks red; Press and hold the * key on the Handset until you hear the “de” sound to
indicate that the handset is registered successfully.
4.
When you place the handset on the base if the light on the base is blinks continuously, it
indicates that the handset was registered to another base. If you want to register this
handset to the base instead of the original one, repeat the item 3 or disconnect the base
power and after 20 seconds follow the above item 2.
For the handset to register successfully it must satisfy the following criteria:
1. Ensure the handset battery has enough charge (the handset light does not shine continuously red when placing
handset onto the base) and is not communicating with other base.
2. Ensure the base is not communicating with 5 registered handsets.
3. Ensure there is no interference nearby.
4. Cancel registered: press and hold the PAGE key on the Base until the LED blinks red; Cancel all the registered
handsets by pressing the PAGE key 7 times continuously.
User Instructions
Receiving a Call
1.
To answer a call using the handset while it is not on the base:
