2
ASSEMBLY STEPS
STEP 1
With the original base removed, install the VESA adapter (
A
) to the monitor. Tilt the male
plug connector on your monitor towards the bottom of the monitor to allow the mating
female connector of the VESA adapter (
A
) to fully lock onto the monitor. Make sure the
VESA adapter (
A
) “clicks” onto the male plug connector of the monitor before mounting in
Step 2.
PACKAGE CONTENTS
TOOLS NEEDED
WARNING!
Phillips
Screwdriver
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
A
(x1)
VESA Adapter
B
(x4)
M4x10mm
Thumbscrew
C
(x12)
M4x1.5mm THK
Washer
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
D
(x1)
U-shaped
Adhesive Pad
