background image

4

1

<Unpairing>

To unpair a paired Bluetooth

®

 device, select the device in the [Delete] screen.

Other Setting and Check

<Visibility Setting>

This setting must always be set to “Disable”.

<BT Information>

You can view the following kinds of information about the IP3NA-BHA ADAPTER:

Firmware and hardware versions

Bluetooth

®

 module information and

standard

Installed profile versions 

Device address and name

Specifications

The Bluetooth

®

 word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such 

marks by NEC Infrontia Corporation is under license. Other trademarks and trade names are those of 
their respective owners.

Introduction

The IP3NA-BHA ADAPTER is an adapter that connects a Bluetooth

®

 device to a multifunctional 

terminal.

The table below lists the type of device that can be connected to the IP3NA-BHA ADAPTER and the 
functions supported by it.

Item

Specification

Destination

Multifunctional terminal bottom-unit connecter (except for economy multifunctional terminal)

Bluetooth

®

 version

Bluetooth

®

 version 2.0

Radio interface

Bluetooth

®

 Class1(1 to 100mW)

Installed profiles

GAP : Generic Access Profile

HSP : Headset Profile

SPP : Serial Port Profile

HFP : Hands Free Profile

Power consumption

About 0.8 W (excluding the telephone)

Power feeding method

Power feeding from the multifunctional telephone

Dimensions (L

×

×

 H)

72mm 

×

 65mm 

×

 25mm (excluding projections)

Mass

About 0.1kg

Operating environment

Temperature: 0 to 40

, Relative humidity: 10 to 90% (no dew condensing)

Restrictions

Keep the IP3NA-BHA ADAPTER at least 1m apart from other IP3NA-BCH ADAPTERs 
and at least 3m apart from other radio equipment.

=2CKTKPI?

 

ĉĊ$CEM1-

Ĵ

Ĵ

ĵ

=$NWGVQQVJ*GCFUGV?

 &GNGVG

 %QPPGEV
ĉĊ$CEM1-

=&GNGVG?
&GNGVG$6&GXKEG1-!

$CEM1-

Ĵ

Ĵ

=$NWGVQQVJ?

 $6+PHQTOCVKQP

ĉĊ$CEM1-

Ķ

=$6+PHQTOCVKQP?
(KTOYCTG8GTUKQP::ZZ
*CTFYCTG8GTUKQP::ZZ
ĉĊ'ZKV

Ķ

Type of device

Available function

Remarks

Bluetooth

®

 

headset

Originating calls to an extension or central office line
Press the headset call (call control) button twice briefly and 
dial the numbers on the telephone.

Answering terminating calls
Press the headset call (call control) button while a call 
terminates with a ring tone. 

The headset call (call control) button allows you to only 

originate calls from the headset and answer terminating 
calls.
Any other headset-specific functions are not supported.

The handset cannot be used while you are talking with the 

headset on. You cannot switch to the headset to use while 
you are using the handset, either.

The ringing of calls 
terminating to the headset is 
linked with that of the 
terminal, though some 
ringing features, such as 
off-hook ringing are not 
supported.

For latest information about 

recommended products, 
please consult with your 
system provider for a list of 
compatible headsets.

A headset with built-in Bluetooth

®

 supporting the HFP/HSP profiles can be connected to the IP3NA-BHA 

ADAPTER. 

The receiver volume can be controlled with the multifunctional terminal (the cursor up and down keys 
or the volume key).

Whether the functions mentioned above work or not depends on the destination system. For more 
details, refer to the manual that comes with the destination system.

The ways you originate calls from the Bluetooth

®

 headset and answer terminating calls may vary 

depending on the type of device you use.

A50-013692-002

Issue 2.0

2008.7

IP3NA-BHA ADAPTER Connection Manual

IP3NA-BHA ADAPTER

Bluetooth  compatible

headset

R

Caution

Reviews: