background image

3

STEP 2 (Optional)

Due to variance in manufacturing, our VESA adapter 

may exhibit a slightly loose fit on your monitor. If you 

find this is the case and you are not satisfied, you can 

use the U-shaped adhesive pad (

D

) provided to create a 

more desirable fit.

Release VESA adapter (

A

) from monitor using the 

release tab. Apply U-shaped adhesive pad (

D

) to the 

monitor male adapter plug as shown. Use your finger 

to smooth out adhesive pad (

D

) to make sure it lies 

flat on the monitor male adapter plug. Reinsert VESA 

adapter (

A

) onto monitor by repeating Step 1.

Note: 

Your monitor will be fully secured either way, and 

there is no risk of it falling off as long as the adapter 

“snaps” onto the monitor in Step 1.

Depending on the thickness of your monitor mount VESA 

plate (very thick VESA plates may require no washers), it 

may be necessary to remove M4 washers (

C

) in order for 

the M4x10mm thumbscrews (

B

) to fully engage the threads 

in VESA adapter (

A

). The best way to determine this is to 

check that the M4x10mm thumbscrew (

B

) is protruding out 

the back of VESA adapter (

A

), as shown in figure below. Be 

sure to also check that removing M4 washers (

C

) does not 

allow the M4x10mm thumbscrew (

B

) to contact the back of 

your monitor. If you experience difficulties, please contact 

customer support.

IMPORTANT!

STEP 3

Mount your monitor with VESA adapter (

A

) now 

attached from Step 1 to your VESA monitor mount and 

secure using 3X - M4 washers (

C

) and 1X - M4x10mm 

thumbscrew (

B

) per hole.

Note: 

Once the thumbscrews are finger-tight, it 

is not necessary, but recommended to tighten 

slightly more with a phillips screwdriver.

D

D

Reviews: