ASSEMBLY/ADJUSTMENT
E-SMT
MONITOR ARM ADAPTER
FOR ALLSTEEL
®
STRIDE
E-SMT Rev A 2/17
Model E-SMT-SLV
Page 1: ...ASSEMBLY ADJUSTMENT E SMT MONITOR ARM ADAPTER FOR ALLSTEEL STRIDE E SMT Rev A 2 17 Model E SMT SLV ...
Page 2: ...es attachment of select Edge and Evolve monitor arms to Allsteel Stride benching systems After the E SMT installation is complete follow the instructions that came with the Edge or Evolve system The E SMT can work with the EDGE single monitor arm and the EVOLVE single dual or triple configurations CAUTION Hand tighten screws only Do not use power tools EDGE SMT Mount 1 Base Plate 1 2mm Allen Key 1...
Page 3: ...ews on top of the base assembly securely clamping the assembly in place 5 Press the screw covers in place over the socket screws Proceed with Monitor Arm Assembly Install the Evolve pole or Edge monitor arm into the base assembly and proceed according to the instructions that came with the system Base Plate 1 4 Screw Cover 5 2 Adhere the clamp pad to the bottom of the grommet mount plate 1 13 16 3...
Page 4: ...800 833 3746 esiergo com 2017 ESI Ergonomic Solutions All rights reserved E SMT Rev A 2 17 ...
