E-SMT MONITOR ARM ADAPTER
Clamp Base Assembly to Table
1. Press the base plate to the underside of the EDGE-SMT mount.
3.
Position the base assembly on the table edge.
4.
Use the 3mm Allen key to tighten the screws on top of the base assembly,
securely clamping the assembly in place.
5.
Press the screw covers in place over the socket screws.
Proceed with Monitor Arm Assembly
•
Install the Evolve pole or Edge monitor arm into the base assembly and
proceed according to the instructions that came with the system.
Base Plate
1
4
Screw
Cover
5
2. Adhere the clamp pad to the bottom of the grommet mount plate.
1"
–1
3
/
16
"
3
Table
2