Vivitek DU9900Z User Manual Download Page 33

Page: 33 / 67

DU9900Z DLP Projector - User Manual

UM99000721EN00

Erase the identification number of the remote control

The set ID number is overwritten if new ID number is set, you can press ID SET and CLEAR button to erase ID number of
the remote control.
Press ID SET and CLEAR buttons simultaneously

The backlight of the buttons is flashing one time

Checking the identification number of the projector and remote control

The identification number of the projector and remote control can be checked by entering the SERVICE menu as per the
below image.

“X” represents that the function is not enabled; the number 26 is the current identification number of the

remote control

Note:



Project ID Control function is available when the option is turned on and remote control wire is not

plugged into the wire remote jack port.



If ID Control Enable is set to Off, the projector can receive any control signal from the remote control.

Even if the ID number is set into the remote control.

Summary of Contents for DU9900Z




































































Search results

Summary of Contents for DU9900Z

Reviews:

Related manuals for DU9900Z

Brands by name

Popular brands

Vivitek DU9900Z, User Manual

Search results

Summary of Contents for DU9900Z

Reviews:

Related manuals for DU9900Z

Brands by name

Popular brands