Digital Camera User Manual
Safety Information
1.
Do not disassemble the camera.
Touching the product's
internal parts could result in injury. In the event of a
malfunction or if the camera is accidentally broken
open, take the product to an authorized service center
for inspection.
2.
Avoid contact with liquid crystal.
Should the LCD Screen
break, care should be taken to avoid injury due to
broken glass and to prevent the liquid crystal from
touching the skin or entering the eyes or mouth.
3.
Do not use in the presence of flammable gas.
Using
electronic equipment near flammable gas could result
in explosion or fire.
4.
Observe proper precautions when handling batteries.
The camera uses only AA Alkaline, NiMH, or Lithium
batteries. Batteries may leak or explode if handled
improperly. Remove the batteries (and the memory
card) from the camera if you are going to store the
camera for extended periods. Ensure the camera is
turned off before inserting or removing batteries. Insert
batteries correctly. Do not expose batteries to flame or
excessive heat. Do not immerse batteries in or expose
to water. Discontinue use immediately if you notice any
changes in the battery such as discoloration,
deformation, or leakage.
5.
Observe caution when operating the flash.
Do not use
the flash close to anyone's eyes. This can cause
temporary damage to eyesight. Particular care should
be observed when photographing infants - keep the
flash at a distance of at least 1 meter from infants' eyes.
2
