38
Transferring data to the Computer
Read this section carefully before connecting the camera to a computer. Details on using bundled
software are found in its on-line help. For the operations of computers or operating system, please
refer to the manual supplied with your computer.
System Requirements
Windows 98/2000/Me, Pentium 166 MHz or higher for PC Users
Mac OS 8.6 ~ 9.1, Power PC CPU for Macintosh Users
Color monitor (800x600 24-bit or higher recommended)
Available USB port, CD-ROM drive
80 MB available hard disk space
At least 32 MB RAM
Driver Installation
If you are planing to transfer your images into a computer, make sure to complete the camera driver
installation before the camera connection. The steps are as below:
For Windows
1. Insert the software CD-ROM disc into your CD-ROM drive
2. The setup program starts. Press the Camera driver icon and follow the on screen instructions to
complete the camera driver installation.
3. Restart the computer
For Macintosh
1. Insert the software CD-ROM disc into your CD-ROM drive
2. Double click the install icon inside the folder of the software CD-ROM and follow the on screen
instructions to complete the camera driver installation.
3. Restart the computer
Downloading Images
1. Turn on the power of your PC.
2. Connect the camera and PC using the USB cable supplied.
3. Set the main switch on the top of the camera to . "PC" will appear on the status LCD.
4. Double click "My Computer".
5. Double click the newly created "removable device (G)" .
This assumes that the new device is drive G. The drive letter may differ depending on the
PC you are using.
An "undefined Name" icon will appear on the desktop if connected with Macintosh computer.
6. Double click the "DCIM" folder.
7. Double click the inside folder to display the icon of the image file.
Transferring data to
the Computer
