16
When pressing the
(W) button, the subject
will become smaller (wide). When pressing the
(T) button, the subject will become larger
(telescopic). The zoom range is equivalent to
35 105mm in a 35mm camera.
6. Lightly press the shutter button (halfway).
The
LED1 will light green and the focus and exposure
will be locked. If the subject to focus is not in
the center of the viewfinder, perform
Focus Lock Recording (page17 ).
Viewfinder and LED
For normal recording, aim at the subject using the
entire viewfinder area. To focus, position the sub-
ject within the diagonally-lined center area of [ ]
located at the center of the viewfinder.
For macro recording (0.25m to 0.8m), or if the zoom
position is set to TELE and the distance
between the camera and subject is near, record
with the LCD monitor set to ON since the viewfinder
and the recording range will vary. For macro
recording, see (page20).
Color Status Definition Warning sound
Red Blinking System error (error code displayed on status LCD) Yes
Red Blinking Image blur warning, Low light warning No
Red On Flash charging No
Green Blinking Auto-focus (AF) unavailable* No
Green On Camera ready for recording No
Green and Red Blinking Camera unstable warning, low-luminance warning
or when subject cannot be focused (AF) Yes
Green and Red Blinking Insufficient card space, or card is not inserted,
damaged, unformatted or write-protected No
Green and Red On Formatting card or during process No
The operation of writing the recorded image to the SD Memory Card/Multi-Media Card
will start and at the same time, the card access LED on the side of the camera will light
(orange). When the card access LED turns off, the writing process is completed.
7. Gently press the shutter button completely.
Recording is completed when a buzzer
sound
is heard.
Focus area
LED 1
(Green)
5
LED 2
(Red)
LED Messages
Type
LED 2
LED 2
LED 2
LED 1
LED 1
LED 1,2
LED 1,2
LED 1,2
