manualshive.com logo in svg

Vivitar Vivicam 3635, User Manual

Share
Download
Vivitar Vivicam 3635 User Manual Download Page 14

13

OPEN

4. Close the battery/card cover.

Removing the card

1.  Open the battery/card cover.
2.  Press the edge of the inserted SD Memory Card/Multi-
      Media Card.
3.  The card will unlock and eject.
4.  Close the battery/card cover.

SD Memory Card cannot be inserted and locked if the front/back sides or the up/down
direction are incorrect.

        If force is used when inserting SD Memory Card/Multi-Media Card, damage may
        occur to the connector section.

Caution

SD Memory Cards and Multi-Media Cards are manufactured using precision electronic
components. Do not perform the following as malfunction or damage may occur as a result.
     During image recording, the card access LED is lit. While the lamp is on, do not open the
     battery/card cover or remove the SD Memory Card/Multi-Media Card. Interrupting the
     writing process will not only cause the camera to malfunction but the card may become
     unusable

.

     Do not touch the terminal with hands or metal objects. Damage to the components may
     occur as a result of static electricity. Before handling a SD Memory Card or Multi-Media
     Card, discharge any static build-up from your body by touching grounded metal, etc.

     Keep dust, water and foreign objects away from the terminal section.
     Do not store the card in places with high humidity, dusty places or where static electricity
     or electromagnetic fields are likely to occur.
     Do not bend, drop or apply excessive force.
     Avoid heat, liquid and direct sunlight when using and for storage.
     Do not dismantle or modify.

Press to Eject

Summary of Contents for Vivicam 3635






































Reviews:

No comments

Brands by name

Popular brands

Load more brands