Vivid VTS-4600, Operation Manual

Page: 24 / 75

3.4 Mounting the Display
You can mount the display on a wall.
If you do decide to wall-mount the display, ensure that the wall-mount bracket is installed according to the
instructions included with it. The wall must be capable of supporting a redundant weight factor three
(3) times the weight of the display, or be reinforced.
We re com mend that this be done by a custom installation specialist.
NOTE
Use only the app roved wall-mount kit designed for your display.
3.5 Connections to the Display
Proceed as follows to connect the display to your video sources, external controller(s)
– if present – and AC
power.
When connecting your equipment:
• Turn off all equipment before making any connections.
• Use the correct signal cables for each source.
• For best performance and to minimize c able clutter, use high-quality cables that are only as long as
necessary to connect two devices.
(Don’ t use a 20-foot c able when a 6-foot c able will suffice.)
• Ensure that the c ab les are securely connected. Tighten the thumbscrews on connectors that have
them.