Page | 17
7.
Pull the feed sheet up onto the feed table (7.1) and remove. Cut the film to leave a clean edge (7.2) and stick it to the top
laminating film (7.3). Manually push the feed roller down and insert a thick 300gsm plain card (7.4).
8.
While pushing the card press the foot pedal (8.1)l, moving the sheet into the rollers until it reaches the nip (8.2) and put
the feed gate plate and thumb screws back into position (8.3).
9.
Manually push the feed roller down and insert another card (9.1).
While pushing the card press the foot pedal, moving the sheet
into the rollers until it reaches the feed gate (9.2).Put on the safety
guard and push in the latch (9.3).
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
9.2
9.3
