ENG
VIVAX
7
Connected Wattage
The total power consumption of this device can be up to
2500W (please check rating plate of the product). With this
connected load a separate supply line protected by a 16A
household circuit breaker is recommended.
CAUTION: OVERLOAD:
• If you use extension leads, these should have a cable
cross-section of at least 2.5mm
2
.
• Do not use any multiple sockets, as this device is too
powerful.
ASSEMBLY
Remove the heater and all the
accessories from the carton.
Mount castors on the baseboard in
accordance with picture.
1. Place the heater body inversely with
the bottom upward.
2. Connect and tighten two wheel carrier
plates to the body with butterfly nuts as
shown in the figure.
3. Place the heater upward after it is
installed securely with the wheels touching the ground
WARNING: Do not use the heater unless the feet are
correctly attached if the heater is used as portable
appliance
Summary of Contents for OH-13250M B
Page 62: ...VIVAX ...
Page 80: ...www VIVAX com ...