Vivax FS-41T, User Manual

Page: 45 / 64

VIVAX
ENG
4
Do not allow the air inlet to become blocked or even
partially blocked. This may cause the fan to overheat. If
it does overheat, the safety cut-out will cause the fan to
switch off and remain inoperable until the unit has
sufficiently cooled down. In this event, switch off the
appliance, unplug it and let it cool down. Remove any
blockage to the air inlet or outlet before resuming use. If
the fan should cut out again, even when there is no
blockage, contact the approved service center for
examination and repair.
Do not cover the fan or place anything over it.
Do not place anything through the grills or into the fan.
Do not use the fan if it is not properly and completely
assembled.
Do not use the fan without the mesh guards, as this could
lead to injury.
Do not use the fan within 1 meter of any other electrical
or electronic appliance (e.g.TV,computer,etc.) as it may
cause interference.
The installation of a residual current-operated protective
device with a nominal trip current of 30mAh offers
additional protection. Contact your electrician.
Caution:
1. The appliance is not intended to be operated by means
of an external timer or separate remote-control system.
2. Make sure your hands are dry when plugging in and
unplugging appliance.
3. Ensure all the parts are correctly mounted before
switching on the appliance.
4. Do not immerse the appliance in water or any liquid.