Vivax BO-606FAHTM X, Instruction Manual, Page: 179 / 216

VIVAX
ENG
WARNING: Do not use door and/or handle to carry or move the product.
60 cm Built-In Oven Installation And Mounting
Place of use for product must be located before starting installation. Product mustn’t
be installed in places which are under the effect of
strong air flow. Carry the product
with minimum two people.
Do not drag the product so that floor isn’t damaged. Remove all transportation
materials inside and outside the product. Remove all materials and documents in
the product.
Installation Under Counter
Cabin must match the dimensions provided in
figure 2
.
A clearance must be provided at the rear part of the cabin as indicated in the figure
so that necessary ventilation can be achieved.
After mounting, the clearance between lower and upper part of the counter is
indicated in figure 5 with “A”. It’s for ventilation and shouldn’t be covered.
Installation In An Elevated Cabinet
Cabin must match the dimensions provided in
figure 4.
The clearances with the dimensions indicated in the figure must be provided at the
rear part of cabin, upper and lower sections so that necessary ventilation can be
achieved.
Installation Requirements
Product dimensions are provided in the figure 3.
Furniture surfaces for mounting and mounting materials to be used must have a
minimum temperature resistance of 100 °C.
Mounting cabin must be secured and its floor must be plane for product not to tilt
over.
Cabin floor must have a minimum strength that would handle a load of 60 kg.
Placing And Securing The Oven
Place the oven into the cabin with two or more people. Ensure that oven’s frame
and front edge of the furniture match uniformly. Supply cord mustn’t be under the
oven, squeeze in between oven and furniture or bend.
Fix the oven to the furniture by using the screws provided with the product.
Screws must be mounted as shown in figure 5 by passing them through plastics
attached to frame of the product. Screws mustn’t be overtightened. Otherwise,
screw sockets might be worn.
Check that oven doesn’t move after mounting. If oven isn’t mounted in accordance
with instructions, there is a risk of tilt over during operation.