Vivax BO-606FAHTM X, Instruction Manual, Page: 178 / 216

ENG
VIVAX
INSTALLATION
Ensure that electrical installation is suitable for operationalising the appliance. If not,
call an electrician and plumber to make necessary arrangements. Manufacturing
firm can’t be hold responsible for damages to arise due to operations by
unauthorized people and product warranty becomes void.
WARNING: It is customer’s responsibility to prepare the location the product shall
be placed on and also have power utility prepared.
WARNING: The rules about electrical local standards must be adhered to during
product installation.
WARNING: Check for any damage on the product before installing it. Do not have
product installed if it’s damaged. Damaged products pose danger for your safety.
Important Warnings for Installation:
Cooling fan shall take extra steam out and
prevent outer surfaces of appliance from
overheating during operation of oven. This is a
necessary condition for better appliance
operation and better cooking. Cooling fan shall
continue operation after cooking is finished. Fan
shall automatically stop after cooling is
completed.
A clearance must be left behind the enclosure
where you’ll place the appliance for efficient and
good operation. This clearance shouldn’t be
ignored as it’s required for ventilation system of
the appliance to operate.
Right Place For Installation
Product has been designed to be mounted to worktops procured from market. A
safe distance must be left between the product and kitchen walls or furniture. See
the drawing provided on the next page for proper distances. (values in mm).
• Used surfaces, synthetic laminates and adhesives must be heat resistant.
(minimum 100 °C)
• Kitchen cupboards must be level with product and secured.
• If there is a drawer below the oven, a rack must be placed between oven and
drawer.
WARNING: Do not install the product next to refrigerators or coolers. The heat
emitted by the product increases the energy consumption of cooling devices.
Figure 1