Vivax ACP-24CH70AEB, User Manual

Page: 152 / 177

2
TEMP Button : Press the button to decrease the indoor
temperature setting.
1
RESET Button: When the RESET button is pushed, all of
the current settings are cancelled and the control will return to
the initial settings.(Use a
1mm little round stick to push the
button )
6
ON/OFF Button: Push this button to start the unit operation.
Push the button again to stop the unit operation.
3
TEMP Button : Press the button to increase the indoor
temperature setting.
2
AIR DIRECTION Button: Push this button, the louver can be fixed
at a desired angle. The louver swing(upward or downward) to
a certain angle for each press. When the louver swing at an angle
which would affect the cooling and heating efficiency of the air
conditioner, it would automatically change the swing direction
(upward or downward).
7
FAN SPEED Button: This button is used for setting Fan Speed
in the sequence that goes from AUTO LOW MED to HIGH,
then back to Auto.
8
9
TIMER ON Button: Press this button to preset the time ON(start
to operate). Each press will increase the time ON setting in 30
minutes increments. When the setting time displays 10:00, each
press will increase the time ON setting in 60 minutes increments.
To cancel the time ON program, simply adjust the time ON to 0:00.
10
NOTE: COOL only model has no HEAT feature.
MODE Select Button: Each time you push the button, a mode
is selected in a sequence that goes from AUTO COOL
DRY HEAT and FAN, as the following figure indicates:
AUTO COOL DRY
HEAT
FAN
4
SWING Button: Push this button, the louver would swing up
and down automatically. Push again to stop it .
5
ECONOMIC RUNNING Button: Press this button to go into the
Energy-Saving operation mode. Press the button again to cancel.
11
TIMER OFF Button: Press this button to preset the time OFF
(turn off the operation). Each press will increase the time OFF
setting in 30 minutes increments. When the setting time displays
10:00, each press will increase the time OFF setting in 60
minutes increments. To cancel the time OFF program, simply
adjust the time OFF to 0:00