Vivax ACP-24CH70AEB, User Manual

Page: 144 / 177

The AIR DIRECTION and SWING buttons will be disabled when the air conditioner is not in
operation (including when the TIMER
is set).
Do not operate the air conditioner for long periods the air flow direction set downward
in cooling or dry mode. Otherwise, may occur on the surface of the horizontal
louver causing moisture to drop on to the floor or on furnishings.
Do not move the horizontal louver manually. Always use the AIR DIRECTION or SWING
button. If you move this louver manually, it may malfunction during operation. If the louver
malfunctions, stop the airconditioner once and restart it.
When the air conditioner is started immediately after it was stopped, the horizontal louver
might not move for approximately 10 seconds.
Open angle of the horizontal louver should not be set too small, as COOLING or HEATING
performance may be impaired due to too restricted air flow area.
Do not operate unit with horizontal louver in closed position.
When the air conditioner is connected to power (initial power), the horizontal louver may
generate a sound for 10 seconds, this is a normal operation.
ON
with
condensation
CAUTION
!
7
AUTOMATIC OPERATION
SLEEP OPERATION
DRYING OPERATION
When you set the air conditioner in AUTO mode, it will
automatically select cooling, heating(cooling/heating
models only), or fan only operation depending on what
temperature you have selected and the room temperature.
The air conditioner will control room temperature
automatically round the temperature point set by you.
If the AUTO mode is uncomfortable, you can select
desired conditions manually.
When you push SLEEP button during cooling, heating
(cooling only type without),or AUTO operation ,
The dry mode will automatically select the drying
operation based on the difference between the set
temperature and the actual room temperature.
The temperature is regulated while dehumidifying by
repeating turning on and off of the cooling operation or
only. The fan speed is LOW.
the air
conditioner will automatically increase (cooling) or
decrease (heating) 1
per hour. The set temperature
will be steady 2 hours later. The fan speed will be
automatically controlled .
Note: The unit will be automatically turned off after 7
hours when on SLEEP operation.
fan
Cooling Cooling
Time
DRYING operation
Room
temperature
set temperature
Cooling Fan only Fan only
HOW THE AIR CONDITIONER WORKS
Press Sleep button
1
1
1 hour
1 hour
Set
Temperature
Cooling
Press Sleep button
1
1
1 hour
1 hour
Set
Temperature
Heating