5 Data Logging
Page 24 of 72
4. Now select the spanner on the “NMEA Output” line.
5. Set the following perameters:
6. Press OK to save parameters to the GPS.
7. These parameters are suggested values. Experienced users may decide to alter them to suit the
particular requirements of an application.
8. Pairing with the vLoc receiver is similar to the Holux described previously. Data gathering is also similar
to the Holux procedure.
5.3.2
Transferring Data from the vLoc2 to a Computer
To transfer data from the vLoc series 2 receiver to a computer requires the use of a simple free of charge
software package MyLocator2. It can be downloaded from the Vivax-Metrotech web site
www.vivax-
metrotech.com
.
