background image

1 General Safety & Care Information 

Page 2 of 72 

Charging  for  prolonged  period  of  time  could  overcharge  the  battery,  reduce  the  battery  life  and  in 
extreme circumstances cause damage to the locator and fire. 

 

1.4.3 

Lithium-Ion Batteries (Rechargeable) 

 

Lithium-ion Batteries – some products use Lithium-ion batteries – the requirements for marking and 
transportation  are  still  developing.  Please  contact  Vivax-Metrotech  before  shipping  products 
containing Lithium-ion batteries or Lithium-ion battery packs on their own for any “special instructions”. 

 

1.4.4 

Lithium Metal Batteries (Non Rechargeable) 

 

Commonly  known  as  “button  cells”  these  are  small  –  non  rechargeable  batteries  used  to  power 
internal “clocks” within some units (similar to computers). Generally they have a life of 3-5 years. 

 

Under no circumstances should any attempt be made to charge these batteries. 

 

Dispose  of  to  your  company’s  work  practice/environmental  standards,  the  prevailing  laws,  or 
recognized best practice. Always dispose of batteries responsibly. 

 

1.4.5 

General Rules Regarding Disposal of Batteries 

 

NEVER disassemble a battery, or battery pack. 

 

Never dispose of in a fire or water. 

 

Dispose of batteries in accordance with your Company’s work practice/environmental standards, the 
prevailing laws, or recognized best practice. Always dispose of batteries responsibly. 

 

1.4.6 

Transportation of Lithium-ion and Lithium Metal Batteries 

 

The  Lithium-ion  and  Lithium  metal  batteries  used  in  Vivax-Metrotech  products  meet  the  required 
safety standards and include the designated protection circuitry.  

 

Recent  regulation changes  require  that  when  batteries  with  Lithium-ion  and  Lithium metal  batteries 
are  transported  the  packaging  MUST  included  specified  warning  labels. 

Please  contact  Vivax-

Metrotech Customer Service (USA 1-800-446-3392, Interna1-408-734-1400 (USA Pacific 
Time Zone)) for more details.

 

 

Regulations have also changed regarding the shipping of spare battery packs (battery packs that are 
not inside a product). There are limitations on the weight of the package, and the packaging must be 
marked  with  the  appropriate  warning  labels. 

Please  contact  Vivax-Metrotech  Customer  Service 

(USA 1-800-446-3392, Interna1-408-734-1400 (USA Pacific Time Zone)) for more details.

 

 

Vivax-Metrotech  vLoc  Series  2  products  using  Lithium-ion  battery  are  classified  as  "not  restricted" 
they can be shipped normally by road/rail/sea & air (passenger & freight aircraft) without restrictions. 

 

 

IMPORTANT 

Remember  –  Batteries  contain  dangerous  chemicals  –  They  can  be  affected  by 
many  things  such  as  water  ingress  or  heat  –  In  some  circumstances  they  can 
explode. They also can cause electric shocks!

 

 

Summary of Contents for vLocML2















































































Reviews: