Vivax Metrotech vLocDM, User Handbook Manual

Page: 24 / 54

Page 18 of 47
Select the desired function by pressing the “+” or “-” pushbutton. The active function will be highlighted in red. To
change the setting of the selected function, press the “return/ ” pushbutton.
Configurable options are:
Speaker Volume
Backlight
Frequency
Frequency
Imp/Metric
DM Current
Power Sound
Radio Sound
Active Sound
Locate Mode
Off, Low, Med, High
Off, Low, High
Enter
English
Meter, Feet
Live Static
Normal, Modulated
Normal, Modulated
Enter
Note:
Sub menu
Live - continuous update of DM current
Static - One shot display of DM current
per measurement
Sub menu
To ensure maximum use from the battery it is recommended that the speaker volume be set to “Med” and the
backlight set to “Low”.
“Frequency” and “Locate Mode” functions are written in green. This is to indicate that there is a sub menu to
choose from. To enter the sub menu, press the “return/ ” pushbutton.
To exit to the Locate Screen, press “i” pushbutton.
5.6 Setting Frequency Options
Return/ Pushbutton
Normal, Modulated
Normal – the pitch remains the same but
the volume increase as the signal increases
Modulated – the pitch changes as the signal
increases
DM Frequency 3+6Hz, 4+8Hz, 3Hz, 4Hz Selects the DM current measurement
Bluetooth Pairing Enter
Used to pair the receiver with external device
such as external GPS
Enable, Disable
Disable when Bluetooth not in use to improve
locate performance.
Bluetooth Search
5 Receiver Functions and Operations