™
Page 16 of 67
2 vLoc3 RTK-Pro Receiver
2.8 vLoc3 RTK-Pro Receiver Locate Screen Shots
The user interface of the vLoc3 RTK-Pro is under continual development. The screenshots described may differ slightly from
current screens.
The vLoc3 RTK-Pro gives the user a choice of different locate screens. The choice of screen depends on application and user
preference.
●
Classic Screen
●
Vector Screen
●
Plan view Screen
●
Transverse Plot Screen
This manual will first explain the functions of the “Classic Screen” as familiarity of this screen will help understand the functions
of the others.
An overview of the Classic Screen
Classic Screen:
69.9
32.8kHz
58dB 2’7”
50mA
4G
Status bar:
All the screens have a status bar at the top which indicates various settings of the locator. The bar is shown below:
50mA
69.9
4G
2
1
3
8
7
5 6
4
1
Antenna configuration (meter response) described
later in the manual
5
Bluetooth status (If Transmitter link is fitted this icon
will replace blue tooth icon as they are mutually exclusive)
2
This icon is shown in this position when
the sonde locate screen is selected
6
GPS status (see below for further explanation)
3
Signal Current/Depth to the target line. (can also be
set to display signal current on the line or both)
7
Speaker volume setting
4
Cellular status (See below for further explanation)
8
Battery type and remaining charge
The Status Bar contains information relating to Cellular and GPS (GNSS) connectivity as below:
G
E
3G
H
4G
Cellular status:
No cellular module or no signal bars
1-5 bars of cellular signal, no data
GPRS (2G) data connection
EDGE (2.5G) data connection
UMTS (3G) data connection
HSPA (3.5G) data connection
LTE (4G) data connection
GPS status:
No GPS module
GPS module no data
Non-RTK GPS data
RTK float GPS data
RTK fix GPS data
4G