VITO VIASL40, Instruction Manual

Page: 27 / 40

Question/Problem - Cause
Cause
Solution
The vacuum cleaner does not start:
•
No supply voltage;
•
Faulty ON/OFF switch;
•
Faulty electric motor;
•
Check the power cord, plug, socket and circuit breaker;
•
Contact technical assistance;
•
Contact technical assistance;
Low suction power:
•
Supply voltage is too low;
•
Hose, tube and suction fittings are clogged or
blocked;
•
Damaged hoses, pipes or connectors;
•
Filters are damaged or dirty;
•
Use a power supply compatible with the vacuum
cleaner's technical data;
•
Unclog;
•
Repair or replace damaged parts;
•
Clean the filters, replace if necessary;
The warranty of this power tool is two years from the date
of purchase. You should, therefore, keep your proof of
purchase during this period. The warranty covers any
manufacturing defect in material or operation, as well as
parts and work needed for their repairing.
Excluded from the warranty are the misuse of the product,
any repairs carried out by unauthorized individuals (outside
the service center of the brand VITO ) as well as any damage
caused by the use of it.
We declare, under our sole responsibility, that the product
labelled 1200W / 40LTS WET AND DRY VACUUM CLEANER
with code VIASL40 complies with the following standards
or normative documents: EN 62233:2008, EN 60335-
1:2012+AC:14+A11:14+A13:2017+A1:2019+A2:2019+A14:2
019, EN 60335-2-2:2010+A11:12+A1:13, EN 55014-
1:2017+A11:2020, EN 55014-2:2015, EN IEC 61000-3-
2:2019, EN 61000-3-3:2013+A1:2019, as defined by:
2014/35/EU
–
Low Voltage Directive
2014/30/EU - The Electromagnetic Compatibility Directive
S. João de Ver,
6th january 2022
Central Lobão S. A.
Technical supervisor
Hugo Santos