VITO VIAC4, Instruction Manual

Page: 26 / 40

When performing maintenance or cleaning tasks on the
vacuum cleaner, set the ON/OFF switch off to "0" position
and unplug the power cord.
When the filter is dirty, the suction power decreases
considerably. Clean the filter regularly to increase its
efficiency and extend the vacuum cleaner’s service life.
Never operate the vacuum cleaner without the filter
installed.
If the filter is completely covered in ash:
1. Undo the fastening latches (5) and remove the vacuum
cleaner head;
2. Remove the HEPA filter;
3. Blow out the filter with compressed air until it is clean;
4. Refit the filter and assemble the other components in the
reverse order of disassembly.
Cleaning
After each use, clean all the components of the ash vacuum
cleaner. Clean the vacuum cleaner with a clean, damp cloth
blows it out with compressed air at low pressure.
Careful handling protects the power tool and extends its
service life.
Storage
Store the vacuum cleaner in its original packaging in a
clean, dry place out of children's reach.
The packaging is made up of recyclable materials,
which you can dispose on local recycling points.
Never dispose of power tools with your household
waste!
According to the European Directive 2012/19/EC on
electrical and electronic equipment waste and its
transposition into national law, power tools must be
collected separately and delivered to the collection sites
intended for this purpose.
You can get information regarding the disposal of the power
tool through the person in charge for recycling in your city.
Tel.: +351 256 248 826
E-mail: international@centrallobao.pt
Website: www.centrallobao.pt