VITO PRO-POWER VILGE710, Instruction Manual

Page: 33 / 48

33
Not enough suction, too much dust:
 The vacuum isn’t turned on;
 The sandpaper holes aren’t matching the velcro
pad drilling;
 The sanding plate brush is misplaced or worn;

Suction hose is clogged or bent;
 The vacuum bag is full;
 Misconnection between the sander and the vac-
uum;
 Inadequate rotation speed;
 Turn on the vacuum;
 Place the sandpaper in the right position;
 Place or replace the brush in the sanding plate;

Unclog or straighten the suction hose;
 Replace the vacuum bag;
 Connect the cables according to the installation in-
structions;
 Adjust the rotation speed;
The machine body heats too much:
 Machine in overload;
 There is poor assembly of the casing or parts in-
side the sander;
 Supply voltage too low;
 Reduce work pressure;
 Check for any blockage or parts touching the car-
cass;
 Check supply voltage and adjust according to tech-
nical specifications;
Sparks around the collector:
 Brushes are worn out;
 Inductive or induced in short-circuit;
 Replace the brushes;
 Contact technical assistance;