11
EN
PROBLEM
CAUSE
SOLUTION
Motor won’t start
No power
Check connections and voltage values
Impeller stuck
See section on maintenance
Motor turns without
pumping water
Clogged filter
Move pump closer to water outler level
Excessive intake height
Check intake pipe is airtight
Air in intake
Make sure foot valve is immersed by at
least 60 cm
Clean filter
Pump needs to be primed again
Flow rate insufficient
Intake height at limit
Check intake height
Filter partially clogged
Clean foot valve and, if necessary, whole
intake pipe
Impeller blocked
Disassemble pump and carefully clean
pump body and impeller
Tripped motor
oveload cutout
Overheated motor
Check voltage and ventilation
Impeller stuck
Release impeller (see section on mainte-
nance)
If these precautions aren’t followed,
the pumps can be damaged and the
warranty will have no effect.
DECLARATION OF
CONFORMITY
We declare under our exclusive
responsibility, that the product
SELF-PRIMING JET PUMP with
code VIBAF750; VIBAF1100;
VIBAF1500, meets the following
standards or standardization
documents:
EN 60034, EN 60335,
EN 62233, EN 61000, EN 809,
EN ISO 12100, EN 60204,
EN ISO 13857 e EN ISO 13849,
according to the determinations of
the directives:
2014/30/EC - Electromagnetic
Compatibility Directive;
2014/35/EC - Low Voltage
Directive;
2006/42/CE - Machinery
Directive.
2000/14/CE - Sound power level
guaranteed
S. João de Ver,
14 th of April of 2014.
Central Lobão S. A.
Responsible for the Technical File
WARRANTY TERMS
The warranty of this machine is two
years from the date of purchase.
You should, therefore, keep your
proof of purchase during this period
of time. The warranty covers any
manufacturing defect in material
or operating, as well as parts and
work needed for their recovery.
Excluded from the warranty
the misuse of the product, any
repairs carried out by unauthorized
persons (outside the service center
of the brand VITO) as well as any
damage caused by the use of it.
