P/7
P/8
Parameters and Circuit Diagrams
Product type: VS-691
Rated power: 2000 W
Voltage: 220-240 V ~ 50 Hz
Steam pressure: 1.0bar
Steam flow: 38 g / min (max)
Tank capacity: 1500 ml
2. Take out the support pole, (as
shown in Picture), pull out the Pole
3, screw it. Clockwise into Pole 4,
then Pull out the pole 2, screw it
clockwise Into pole 3, the last pull
out the pole 1, Screw it clockwise
into pole 2.
Note: (as shown in the right picture)
this action is wrong. Do not screw
the black snap close. Do not install
like this.
3. Insert the assembled support pole
into the hole on the machine body
until it reaches the bottom. Screw
clockwise the snap close of the hole
to fasten the support pole.
Product Installation
1. Unpack the machine and stretch the power
cord.
4. Insert the hanger into the top of support pole, screw it to the designed height and
then screw the fixing snap close beneath it to fasten it (as shown in Picture 1).
Spread the hanger and screw the adjusting snap close beneath it to reach a
designed range (as shown in Picture 2). (Choose the height as required)
5. Insert the hook for ironing brush into the top of support
pole and tighten it.
6. Lift down the hood of connecting hole, take out the ironing
brush, align the plug of ironing brush with and insert it into
the corresponding hole on machine body, and tighten it
clockwise. After use, please pull out the ironing brush and
cover the hood.
Circuit diagram of Garment Steamer
www.vitesse.ru