background image

1.

Use at the rated power voltage.
Use of non-rated voltage may cause fire, electric shock and breakdown.

2.  Do not open the cabinet and external cover.

The high voltage inside of this product may cause the electric shock.

3.

Do not remodel or disassemble this product.  
Remodeling or disassembling in wrong method may cause fire, electric shock or breakdown.

4.

Do not insert or drop any foreign substance such as metals or flammable object inside from the air hole.
It may cause fire, electric shock or breakdown.
If any foreign substance is inserted inside of this product, turn off the power, pull the plug out of the socket and contact
the sales department.  Do not use the product with the foreign substance in.

5.   Do not place any vase, potted plant, cup, medicine and any container with water on this product.

If the liquid is spilt, it may cause the fire, electric shock or breakdown.

6.

Do not place this product with water nor moisten it.
If water flows in it, it may cause the fire, electric shock or breakdown.
If there is water inside of the product, turn off the power immediately, pull the plug out of the socket and contact the
sales department. Do not use the product with water in it.

7.

Never touch the antenna lie or power plug if it stars to thunder.
It may cause the electric shock.

8.

If any impact is applied, the parts inside of the product may be fallen out or broken to be the cause of fire, electric shock
or breakdown.

9.

Clean the dust on the power plug periodically.
The dusty power plug may cause the poor insulation due to the moisture to be the reason of fire.

10. Do not destroy, process, make closer to heating device, bend or twist forcibly, place any heavy object on nor bind the

power cord or power plug.  If it is used in the broken condition, it may cause fire or electric shock.

11. Do not touch the power plug with wet hands.

If you pull in or out the power plug with wet hands, it may cause electric shocks.

12. Put the power plug in firmly.

Putting the plug incompletely may cause the electric shock or fire by the generation of heat. 

13. Do not use any non-rated power socket with numerous devices jointed on one power socket or cable device.

The wire of non-designated capacity may cause the fire due to the generation of heat.

14. In case of malfunction, turn off the power switch immediately and pull out the power plug.

If this product is used in the abnormal condition such as damage to it, foreign substance inside of the product, generation
of joints, smelling, smoking, overheating and non production of signal, it may cause fire, electric shock or breakdown.
Turn off the power switch immediately, pull the power plug out of the socket and contact to the sales store..

15. Leave space 10 cm or more from the wall for the installation of the device.

Do not install it close to the wall nor block the ventilation of the air.
Insufficient ventilation or accumulated heat inside of the product may cause the fire.

16. Do not install it at the unstable location such as on the bouncing prop or tilted place.

It may be tipped over as it loses balance or damaged as it is fallen down.

17. Do not install at the place with moisture or dust.

It may cause the fire or the electric shock. 

Summary of Contents for VTM-PV22I

































Reviews: